Onkyo HT-S790 Instruction Manual page 47

Using the Listening Modes
The following table shows which listening modes can be used with each input signal format.
Source format
Listening mode
Pure Audio (Not North
American models)
Direct
Stereo
Mono
Multich
*3
PLIIx Movie/Music/Game
Neo:6 Cinema
Neo:6 Music
Neural Surround (North
American models only)
Dolby D
Dolby D + Neo:6
Dolby D EX
Dolby D+PLIIx Music
Dolby D+PLIIx Movie
DTS, DTS 96/24
DTS-ES Discrete
DTS-ES Matrix
DTS+Neo:6
DTS+Dolby EX
DTS+PLIIx Music
DTS+PLIIx Movie
Mono Movie
Orchestra
*6
Onkyo Unplugged
Original Studio-Mix
DSP TV Logic
All Ch Stereo
Full Mono
*1. In the Pure Audio and Direct listening modes, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In
listening modes other than Pure Audio, Direct, and Stereo, 64 kHz, 88.2 kHz, and 96 kHz PCM is processed at 32 kHz, 44.1 kHz, and 48 kHz
respectively.
*2. In listening modes other than Pure Audio, Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.
*3. If the Surr Back parameter is set to None, or speaker set B is on, normal Pro Logic II is used.
*4. Not available for 88.2 kHz and 96 kHz PCM input signals.
*5. If the Surr Back setting is set to None, or speaker set B is on, normal DTS is used.
*6. Available only when surround speakers are connected.
: Only available on 6.1/7.1-channel playback systems. Not available while speaker set B is on.
: Only available on 7.1-channel playback systems. Not available while speaker set B is on.
Tip: To check the format of the digital input signal, see "Displaying Source Information" on page 37.
Dolby Digital
Analog,
*1
3/2.1
PCM
2/0
2/2.1
CD, TV,
radio,
DVD, DTV, etc.
cassette,
etc.
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔
*4
✔
✔
✔
✔ ✔ ✔
DTS/DTS 96/24
3/2.1
1/0, 1+1 Other
2/2.1
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔
✔
✔ ✔ ✔
*2
Multich
DTS-ES
analog
2/0
Discrete Matrix
DVD, CD, etc. DVD
✔ ✔
✔ ✔
✔
✔
*5
✔
✔
✔ ✔
✔
✔
47