Battery Panel Section - Sony DCR200 Service Manual

DCR-DVD200/DVD200E/DVD300
[SERVICE POSITION TO CHECK THE DVD DRIVE SECTION]
Connection to Check the VTR Section
To check the DVD drive section, set the DVD drive to forced PLAY mode.
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
AC power
AC IN
adaptor

Battery panel section

PROCEDURE OF REMOVING THE VC-310 BOARD.
(SERVICE POSITION) TO CHECK THE DVD DRIVE SECTION)
1 2-2. F PANEL SECTION .....................................
2 2-4. CABINET (R) SECTION ..............................
3 2-26. BATTERY PANEL SECTION........................
4 2-27. EVF SECTION..............................................
5 2-31. LENS SECTION...........................................
6 2-33. VC-310 BOARD............................................
Exiting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
CN4901
CN4001
LANC jack
DC-IN jack
Adjustment remote
commander (RM-95)
(page 2-3)
(page 2-4)
(page 2-16)
(page 2-17)
(page 2-21)
(page 2-23)
2-24
CN4902
Extension cable (100P)
(J-6082-352-A)
VC-310 board
CN1008
CN1009
Monitor TV
CPC-8 jig
(J-6082-388-A)
AUDIO/
VIDEO jack