Toshiba B-SA4T Series Product Description page 41

3. OPTIONAL KIT
NOTE: MAC address can be checked by using "arp -a" command on MS-DOS Prompt.
<Example>
The following screen shows an example of executing an arp –a command on MS-DOS Prompt.
After wireless LAN board (default IP address: 192.168.10.21) is pinged, IP address and MAC address
are displayed.
IP address of printer
NOTE: As obtained IP address and MAC address are stored in the cache of the host for a certain period of
time, other device's address may be displayed.
LED
<Operation>
LED
LED1 (Red)
LED 2
(Orange)
LED 3
(Orange)
MAC address of printer
Status
ON
Blink
ON
Blink
OFF
ON
Blink
OFF
LAN status
Communicating
Starting
Wired LAN is connected.
Communicating with the printer
Disconnected from the printer.
In case of station mode:
Log in the access point.
In case of access point mode:
User unit is log in.
Communicating with a device connected
via wireless LAN.
In case of station mode:
Log out from the access point.
In case of access point mode:
User unit is log out.
3- 6
3.4 Wireless LAN Board: B-SA704-WLAN-QM
ARP –a command
IP Address of Host PC
Address of other
(Refer to Note)
EO10-33016A