Toshiba B-SA4T Series Product Description page 21

1. OUTLINE
(6) Cutter home position sensor for optional cutter module
This sensor is positioned inside of the cutter unit. This is a photo-coupler, consisting of an LED
and a transistor. When the arm linked with the cutter blade intercepts the photo-coupler, it is
considered as a cutter home position.
Cutter Unit
(7) Cutter front cover sensor (micro switch)
The cutter front cover sensor is a micro switch, which is provided on the lower left of the cutter
unit. When the cutter front cover is closed, the arm of the cover turns the micro switch. A cutter
front cover status is detected depending on the micro switch is turned on or off.
Arm
Cutter Home
Position Sensor
Cutter Front Cover Sensor
1-19
1.5 Electronics Specifications
Arm
EO10-33016A