Dimplex DF3033ST Owner's Manual page 9

Fireplace Installation
strip the individual conductor from
the end.
③
Loosen the screw securing
the junction box cover and
remove the cover.
④
Take the cables out from the
junction box, loosen the two wire
twist nuts and remove the cord
set (Figure 2).
Figure 2
⑤
Route the power supply wire
through the knockout on supplied
alternative junction box cover
and secure with a wire clamp (not
supplied) (Figure 3).
Fireplace
Junction
Box
White wire (N)
Black wire (L)
Green wire (G)
Figure 3
⑥
Connect the black wire (live)
from the unit to the black wire
from power supply (Figure 3).
⑦
Connect the white wire
(neutral) from the unit to the white
wire from power supply
(Figure 3).
⑧
Connect the green wire
(ground) from the unit to the
green wire from power supply
(Figure 3).
White wire (N)
Black wire (L)
Green wire (G)
120 V Power
Supply
(Breaker Panel)
9