Auto Tuner Setup - JVC LT-32WX84 User Manual

Jvc lcd flat television users guide

Hide thumbs Also See for LT-32WX84:

Table of Contents

Quick Setup

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the

active ones and skipping over blank ones or channels with weak signals. This means when you

scan (using the C

HANNEL

��

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your

quick setup is now complete. You can now begin watching your television, or you can continue

on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

• Noise muting will not work during Auto Tuner Setup.

• Skip appears only for interactive plug-in menu.

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case, use the menu to perform these settings. See pages 38, 45 and 30.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending

on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is

normal.

��

+/– buttons) you will receive only clear, active channels.

√®

†

��

Programming will take approximately 1 to 2

The Quick Setup is complete

Plug-In Menu

To choose CABLE or AIR (or SKIP when

you skip Auto Tuner Setup)

To START

��

minutes.

Table of Contents