Auto Tuner Setup
The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
To TUNER MODE (IN ANALOG)
π †
è
To choose CABLE, AIR or SKIP
To TUNER MODE (IN DIGITAL)
π †
è
To choose ATSC, DIGITAL CABLE or SKIP
Press the O
Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished
Note:
• Digital Auto Tuner Setup will take approximately 14 minutes.
button
ENU
button to start
K
Onscreen Menus
AUTO TUNER SETUP
IN ANALOG
TUNER MODE
IN DIGITAL
TUNER MODE
SELECT
PRESS OK TO START
OPERATE
MENU
AIR
ATSC
EXIT
35