Power Supply; Mains Operation; Battery Operation - Grundig RCD 1445 USB Manual

Portable radio cd/mp3/usb player
Hide thumbs Also See for RCD 1445 USB:
Table of Contents

Advertisement

POWER SUPPLY

Mains operation

Note:
Check that the mains voltage on the type plate
7
corresponds to your local mains supply.
If this is not the case, contact your specialist dealer.
7
1
Plug the mains cable supplied into the
socket on the radio recorder (back of device).
2
Plug the mains cable into the wall socket.
Caution:
The device is connected to the mains with the po-
7
wer plug. To fully disconnect the device from the
mains, pull out the plug.
The mains plug is used to disconnect the device. It
7
shall remain readily operable and should not be
obstructed during intended use.
22
ENGLISH
_____________________________________________________

Battery operation

1
Open the battery compartment by pressing the catch
and removing the lid.
2
Insert six batteries (6 x 1.5 V/type IEC R14/UM2/
C-size), observing the polarity marked on the lid of
»AC
«
the battery compartment.
~
3
Close the battery compartment.
Notes:
7
7
7
7
Environmental note:
7
Do not expose the batteries to extreme heat,
caused for example by direct sunlight, heaters or
fire.
Remove the batteries when they are flat or when
you know that the device will not be used for a
long period of time.
The manufacturer accepts no liability for damage
resulting from leaking batteries.
The batteries are switched off during mains op-
eration.
Batteries, including those which contain no heavy
metal, may not be disposed of with household
waste. Please dispose of used batteries in an en-
vironmentally sound manner. Find out about the
legal regulations which apply in your area.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents