Using The Manual Bypass Tray - Konica Minolta bizhub 163 User Manual

3

Using the manual bypass tray

Follow the procedure described below when using the manual bypass tray
to print one page at a time.
1
From the computer, display the Setup tab for the printer driver, and
then select "Bypass" in the "Paper Source" list (page 2-23).
2
Perform the print operation from the computer.
3
When the message "PRINTER MODE LOAD PAPER" appears, load
paper into the manual bypass tray.
– Insert one sheet of paper with the
front side facing down, lightly
sliding the paper as much as
possible into the feed slot.
– Slide the paper guides to fit the
size of paper being loaded.
3-8
PRINTER MODE
LOAD PAPER(
User01
Control panel operations
)
GDI Printer Controller