Step 2.
Disconnect the power cord from the connector on the computer
from electrical outlet.
Step 3.
Connect the new power cord as shown.
Removing the stand base
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches
or other damage.
2
B50 -30/B50-35
B50-30/B50-35
1
, then unplug the power cord
.
Chapter 7
Replacing hardware
23