Lenovo B50–35 Hardware Maintenance Manual page 52

All-in-one computer

Hide thumbs Also See for B50–35:

Table of Contents

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)

cables, and any other cables that are connected to the computer. Refer to "Left and right view"

and "Rear view" for help with locating the various connectors.

Step 4.

Remove the stand base. Refer to "Removing the stand base".

Step 5.

Remove the foot cover. Refer to "Removing the foot cover".

Step 6.

Remove the optical drive. Refer to "Replacing the optical drive".

Step 7.

Remove the stand holder. Refer to "Removing the stand holder".

Step 8.

Remove the middle cover. Refer to "Removing the middle cover".

Step 9.

Remove the EMI cover. Refer to "Removing the EMI cover".

Step 10. Remove the system fan. Refer to "Replacing the system fan".

Step 11. Remove the speaker system. Refer to "Replacing the speaker system".

Step 12. Remove the rear deco. Refer to "Removing the rear deco".

Step 13. Remove the camera. Refer to "Replacing the camera".

Step 14. Remove the eleven screws that secure the chassis to the LED panel module.

Lenovo B50–35 All-In-One Computer Hardware Maintenance Manual

Table of Contents

Show Quick Links

Table of Contents

B50–30