Replacing The Camera - Lenovo B50–35 Hardware Maintenance Manual

All-in-one computer

Hide thumbs Also See for B50–35:

User manual (59 pages)

Table Of Contents

Table of Contents

Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo

recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches

or other damage.

To remove the rear deco:

Step 1.

Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating

system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)

cables, and any other cables that are connected to the computer. Refer to "Left and right view"

and "Rear view" for help with locating the various connectors.

Step 4.

Remove the stand base. Refer to "Removing the stand base".

Step 5.

Remove the foot cover. Refer to "Removing the foot cover".

Step 6.

Remove the optical drive. Refer to "Replacing the optical drive".

Step 7.

Remove the stand holder. Refer to "Removing the stand holder".

Step 8.

Remove the middle cover. Refer to "Removing the middle cover".

Step 9.

Remove the two screws that secure the rear deco to the chassis, then slide the rear deco upward

to remove it.

Step 10. To reattach the rear deco:

Line up the rear deco with the guide track on the chassis.

Secure the rear deco to the chassis with the two screws.

Step 11. Reattach the middle cover, stand holder, optical drive, foot cover and stand base.