Download  Print this page
   

Advertisement

All-in-One Desktop PC
Unpack
1.
Computer
2.
Mouse
3.
Power cord
4.
Keyboard
6.
Remote control (Selected models only)
1
2
4
5
Version: 1.0
31040254B
Initial setup instructions
1)
Adjust the angle for the best viewing experience. It can be rotated
between 15 degrees and 35 degrees from the vertical.
The computer stand must remain
installed at all times to ensure
maximum system stability.
Make sure the angle of the
computer is at least 15 degrees
from the vertical; otherwise the
computer will be unstable and
could fall over.
To open the computer stand,
refer to the illustration:
2)
If the computer is configured
with a wired keyboard and
mouse, connect the keyboard
5.
User manual
and mouse cables to the
3
appropriate keyboard (PS/2
connector) and mouse
connectors (USB connector).
6
3)
Connect the power cord to the computer and the electrical outlet
as shown below.
If the computer is configured with
a wireless keyboard and mouse,
4)
setup the keyboard and mouse
Press the power button on the side of the computer to turn it on.
wireless connection.(For more
details refer to the back of this
poster).

Advertisement

Table of Contents

   Related Manuals for Lenovo IdeaCentre B500

   Summary of Contents for Lenovo IdeaCentre B500

  • Page 1 Initial setup instructions Adjust the angle for the best viewing experience. It can be rotated Connect the power cord to the computer and the electrical outlet between 15 degrees and 35 degrees from the vertical. as shown below. All-in-One Desktop PC The computer stand must remain installed at all times to ensure maximum system stability.
  • Page 2 After entering Windows, press this key to launch the LVT Microphone (Lenovo Vantage Technology) program, Lenovo's connector pre-loaded Home PC software. In addition to its own functions, the LVT program will allow you to start other Windows compatible software, specially configured to run on this model of computer.

This manual is also suitable for:

Ideacentre b5 series

Comments to this Manuals

Symbols: 0
Latest comments: