Table of Contents
Advertisement
Chapter 2
2: Installation
This chapter describes installing components and devices
on the barebone' motherboard. Please review each of
the following procedures before you start. For the location
and description of system components, please refer to
Appendix 1, Hardware Layout.
Getting Started
The package contains the motherboard/chassis assembly,
plus one box containing the Fan/Heatsink, and one box
containing accessories.
1. Unpacking the package.
2. Remove the two smaller boxes and place to one side.
3. Remove the motherboard/chassis assembly, and
discard the foam and plastic packaging – or save it for
recycling.
4. Unscrew the three thumbscrews at the rear of the barebone
and remove the aluminum Housing.
5. Locate the CPU socket.
Installing a CPU
The motherboard supports the Intel Pentium 4 processor.
Follow the procedures below to avoid damaging the CPU
or motherboard.
User's Manual
Installation
2 - 1
Advertisement
Table of Contents
