Flextronics Mini P4 Barebone Series User Manual page 10

Mini P4 Barebone Series
Selecting a Processor
This motherboard supports all Intel Pentium 4 processors.
The motherboard's BIOS automatically detects the
required settings and configures the CMOS Setup Utility.
Installing the Processor
It is important to review all of the instructions before
beginning the installation procedure. Carefully handle the
processor by its edges, and take all precautions against
electrostatic discharge. The boxed Intel Pentium 4 proces-
sor comes with a Heatsink and Thermal Interface Material
applicator. Non-boxed processors follow the same proce-
dures, but the accessories may have a different appear-
ance. The following illustrations are a generic representa-
tion and may not show the components' exact appearance.
Note that you install the CPU by reaching your hands and
fingers through the chassis frame to manipulate the CPU
and socket.
1. Unlock the socket by pressing the lever sideways, then
lift it up to a vertical angle.
Step 1
2 - 2
Chapter 2
User's Manual