Flextronics Mini P4 Barebone Series User Manual page 18

Mini P4 Barebone Series Chapter 2
Installing the IDE Cable between CDROM and HDD
In vertical down direction the IDE Hard Disk Drive
into lower bay and apply screws on each side of the
bay to make sure Hard Disk was secured seated in
correct place.Connect the power and IDE cable to the
IDE Hard Disk. To ensure air-flow quality issue
regarding thermal from CPU, the IDE cable will need
to be placed between IDE Hard Disk Drive and CDROM
CD Rom Drive
Hard Disk Drive
IDE Cable
2 - 10
User's Manual