Flextronics Mini P4 Barebone Series User Manual page 14

Mini P4 Barebone Series
7. Align the Heatsink and clip assembly with the Reten-
tion Mechanism and place it on the processor. The
Heatsink is symmetrical.
8. With the clip levers in the up position (C), push down
on all four clip frame corners to secure to the Reten-
tion Mechanism hooks (D). Close the clip levers (E).
The levers require force to be completely closed.
Connect the processor fan cable connector to the
motherboard connector.
S t e p 8
2 - 6
S t e p 7
C
E
Chapter 2
D
User's Manual