Advanced Wdm Features (Pc Only) - PRESONUS StudioLive24.4.2 Owner's Manual

Owner's Manual
Connecting to a Computer 6
Using Your StudioLive as an Audio Interface 6.4
an effect. The flexible routing and mixing capability of the StudioLive provides you
with an arsenal of tools previously unavailable to "in the box" mixes. Don't be afraid
to test the limits of modern mixing techniques and to create a few of your own!
Note: The Dig Out button does not function when you have a FireWire return selected
as an input source. If Dig Out is enabled, any aux, subgroup, and the main bus to which
the return is routed will not receive the post-Fat Channel signal. The unprocessed signal
will still be routed to these buses, as well as to the FireWire bus, but the Fat Channel
processing will not.
If you wish to add Fat Channel processing to a FireWire return, you must disable Dig
Out.

6.4.4 Advanced WDM Features (PC only)

Like the FireStudio-family interfaces, the StudioLive features advanced WDM
features to enhance its use as an audio interface. In the upper left-hand
corner of the Universal Control Launcher window, you will find the Settings
menu. From here, you can configure your WDM input and output streams. For
more information on Universal Control, please consult the next section.
Mac users: Please skip to the next section for important information
about using your StudioLive as your main Core Audio device.
1. In the Launch window, go to Settings | WDM setup.
69