PRESONUS StudioLive24.4.2 Owner's Manual page 83

Owner's Manual
Loading an Entire Fat Channel Preset
Loading an FX Preset
Loading a GEQ Preset
SOFTWARE: Universal Control, Capture, and Studio One Artist
To load every component in a Fat Channel preset (Gate, Compressor, EQ),
select it from the Browser window an drag it over any part of the desired
channel. If you drag it over any of the component quick views, it will load
only that component (e.g.., if you drag a preset over the Gate Quick View,
only the Gate will be loaded).
To load an FX preset, select it from the Browser window an drag it over
any part of the desired FX bus in the Master section of the Overview tab.
Once it is loaded, you can use the FX Type menu to change the effect and
create new presets.
Note: At this time, VSL does not transfer the name of the preset to the
StudioLive All FX presets loaded from within VSL will be labled "Natural" in the
FX menu on your StudioLive.
To load a graphic EQ preset, select it from the Browser window and drag it
over any part of the focused graphic EQ. Graphic EQ presets can be
loaded on the Overtab or the Geq tab. Once it is loaded, you can use the
sliders in VSL or the encoders on the StudioLive to make adjustments.
Note that you must be in the GEQ menu page for the Graphic EQ you
wish to control in order to use the encoders on your StudioLive to control
each graphic EQ in VSL. See next section for details.
7
VSL: Virtual StudioLive 7.2
83