Table 2. Standard Response Codes - Motorola A920 Service Manual

Handset Test Commands

Table 2. Standard Response Codes

Opcode Opcode
(Hexadecimal) (Decimal)
0000b (0x00) 0
0001b (0x01) 1
0010b (0x02) 2
0011b (0x03) 3
0100b (0x04) 4
0101b (0x05) 5
0110b (0x06) 6
0111b (0x07) 7
1000b (0x08) 8
1001b (0x09) 9
1010b (0x0A) 10
1011b (0x0B) 11
1100b (0x0C) 12
1101b (0x0D) 13
1110b (0x0E) 14
1111b (0x0F) 15
2 - 6
parse error (no data follows): invalid data length for command
parse error (no data follows): inadequate security level for command/parameter
parser error (no data follows): command/parameter not supported for current protocol
(CDMA, GSM, TDMA)
parse error (no data follows): command/parameter not supported for current mode
(normal, test mode, handset test mode)
parse error (no data follows): unsupported/invalid opcode
parse error (no data follows): unsupported/invalid parameter for opcode
command response: generic success (no data follows)
command response: generic failure (no data follows)
command response: data follows
unsolicited/multiple response: data follows (sequence tag is 0)
error: couldn't allocate memory
error: internal task error
error: Test Command task timed out waiting for response from another SW component
CDMA: parse error (no data follows): command/parameter not supported for current sub-
mode TDMA: command not supported in current Call Stack Test Mode
error: length specified in command header greater than length received by transport
layer
error: irrecoverable error; phone state has been lost. Phone is being powered down
Motorola Confidential Proprietary
Response Field Definition
A920/A925
Preliminary