Power; Number Buttons; Button; Input - JVC LT-26WX84 User Manual

Power

Turns the TV on or off.
Press the P
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 7:
0 (Zero)
7 (Seven)

100+ Button

Use the 100+ button to directly access channels above channel 99. For example, to move to
channel 124, press 100+, 2 (Two), 4 (Four).

Input

Selects the signal input source for the television: Input-1, 2 or 3 for video devices like VCR's
DVD players, or camcorders.
I 1, 2, 3
NPUT
Notes:
• When you return to TV mode, press the R
• You can also access the FRONT CONTROL PANEL screen by using the M
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT and ASPECT menus. Choose INPUT or
ASPECT by pressing M
C +/- buttons (
HANNEL

Digital-In

Use this button to directly select the digital-in input.
Press the D
• Digital-In on the menu will display only when the 480p picture signal in Digital-In is displayed.
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
Volume +/–
Use these buttons to raise or lower the TV's volume level.
button
OWER
† on the front panel and choose input or aspect by using the
ENU
√ ®
OPERATE ).
-I button
IGITAL N
Button Functions
+/T button or direct 10 key pad.
ETURN V
button on
ENU
49