Index; Freeze; Swap; Select - JVC LT-26WX84 User Manual

Button Functions

Index

This allows you to quickly look at up to 12 channels at a time so that you can decide which one
to watch.
Notes:
• Only RF input signal will be displayed.
• You can watch the channel added in channel summary. See page 30.

Freeze

Pressing the F
REEZE
picture displayed on the right. In order to return to the normal display, press the F
once again.
Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this
function will cancel out.

Swap

You can exchange the channel (or input) displayed in the split screen window for the main
screen image by pressing the S
Note: This function will only work in SPLIT mode.

Select

With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you
press S button, the channel number on the top will be highlighted. Each press of S
ELECT
will shift the channel.
Cable Box Note:
The 2–Tuner Multi Screen function may not operate when used with certain cable boxes.
This is because while some models of cable boxes may receive up to 181 channels, and may
only send the signal from one channel to your television. (Please refer to diagram on page
15). For the 2–Tuner Multi screen function to operate correctly, it must have access to all
available channels. Since the television is receiving the signal from only one channel from the
cable box, it is impossible for the 2–Tuner Multi screen function to display a second, different
channel. Because there are many different models of cable boxes in use today, if you are
having problems operating your 2–Tuner Multi screen function feature with your cable box, we
recommend you contact your local cable company for connection advice.
48
1 2
5 6
9 10
button causes the screen to change to the split-screen display with the still
button.
WAP
3 4
7 8
11 12
button
REEZE
ELECT