Connecting The Power Cord To The Ac Outlet; Putting The Batteries Into The Remote Control; Initial Settings (Setup Tour) - JVC LT-20B70BJ Instructions Manual

Connecting the power cord to
the AC outlet
Insert the AC plug on the power cord from
the TV into an AC outlet.
Caution
• Operate only from the power source
specified (AC 220 – 240 V, 50/60 Hz)
on the unit.
• Remove the AC plug from the outlet to
completely disconnect the TV from the
power supply.
Putting the batteries into the
remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on how much you use the
remote control.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as you need to.
• If the remote control does not work
properly, replace the batteries.

Initial settings (Setup tour)

When the TV is first turned on, it goes into
the initial settings mode and the Quick Setup
menu will appear. Follow the instructions on
the screen display to make the initial settings.
1 Press the
control
The TV turns on from standby mode.
• Check that the AC plug on the power
cord from the TV is connected to AC
outlet.
• If the Quick Setup menu does not
appear this is because your TV has
already been turned on for the first
time. Use the "Language" and "Auto
Program" functions to make the initial
settings. For details, see "Language"
on page 26 and "Auto Program" on
page 22.
Setting up your TV
button
PICTURE/OK button
MENU button
1 4 2 3
/ / / buttons
button on the remote
Remote control
sensor
Power lamp
7