Initial Setup; Auto Tuner Setup; Channel Summary - JVC LT-26WX84 User Manual

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
Press the O
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "√". You can delete
channels from the scan by removing the "√". If any channels
were missed during auto tuner setup and you wish to add
them, you may by placing an "√" next to the channel number.
è
To the SCAN column
π †
Press the O
Press the M
You can block access to a channel by activating the channel lock.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
è
To the Lock Column (
π †
Press the Z
Press the M
30
button
ENU
button to start
K
button
ENU
button to include or delete from scan
K
button when finished
ENU
button
ENU
)
button to lock or unlock that channel
ERO
button when finished
ENU
AUTO TUNER SETUP
TUNER MODE
PRESS TO START
OK
SELECT OPERATE
CHANNEL SUMMARY
CHNO. SCAN CHNO. SCAN
01 06
02 07
03 08
04 09
05 10
SELECT OPERATE
OK
CABLE
EXIT
MENU
EXIT
MENU