Button Functions; Multi Screen Function; Index; Twin - JVC LT-40X776 User Manual

Lcd flat television

Hide thumbs Also See for LT-40X776:

User manual (96 pages)

User manual (96 pages)

Table Of Contents

Table of Contents

Multi Screen Function

Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).

Note: After you press any multiscreen button, if you press the menu button, only the picture

adjust screen will appear.

Index

This allows you to quickly look at up to 12 channels at a time so that you can decide which one

to watch.

Notes:

• Only RF input signal will be displayed.

• You can watch the channel added in channel summary. See page 36.

Twin

Activate the split-screen option by pressing Twin on

the remote control. The channel (or input) you were

watching before pressing Twin will appear on the left,

the new channel will appear on the right. The sound

will continue to come from the main screen channel

(or input). To turn split-screen off and return to

normal television viewing, press T

the B

button.

ACK

Notes:

• If the signal that you are watching is coming from the HDMI input, you cannot enter the

SWAP or INDEX mode.

• Main Screen and Split Screen will not display the same channel or input at the same time.

• You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.

• Split-screen functions will not work with locked channels or channels blocked by V-Chip

ratings limits. A grey screen will display instead.

• With split screen, the picture from the component terminal and DIGITAL-IN terminal will

not be displayed.

• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of

480p, 720p and 1080i from the component terminal and DIGITAL-IN terminal.

• After you press the Select button, and select SPLIT SCREEN when you press the

OK button, select normal screen. If you don't operate, the MAIN CHANNEL SCREEN will

be automatically selected about 8 seconds later.

• Aspect does not work in Twin mode.

• When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.

• When the cable card is inserted into the TV, the combination of analog broadcasting and

digital broadcasting will not appear in the TWIN mode.