Nokia CK-10 Installation Manual page 10

I n s t a l l a t i o n
speed control systems, airbag systems. Should you note a fault or
change in the operation of such a system, contact your car dealer.
• The car kit should not be installed in the head impact area.
• Do not wire car kit equipment to the high voltage lines of the
ignition system.
• Take care not to cause damage to electrical cables, fuel or brake
lines, or safety equipment during installation work.
• Ensure cables are placed so that they are not subjected to
mechanical wear and tear. Do not place cables under car seats or
over sharp edges.
■ Installing the car kit
See the illustration on page 1 for an example of a suitable installation of
the car kit equipment.
You also need to install a phone holder (sold separately) that is
compatible with the mobile phone to be used. If you want to install an
external antenna (sold serarately), you either need an antenna coupler
that is compatible with the phone holder in use, or a phone holder with
a built-in antenna coupler.
When installing the hands-free unit, ensure that it does not block the
vents and is mounted securely and as vibration-free as possible. To
mount the unit, attach the mounting plate supplied with the car kit and
secure the hands-free unit using the screw that goes through the unit
and the phone holder.
10