Samsung HP-R5052 Service Manual page 82

Operation Instruction & Installation
11-3-5 How to Adjust Mounting Angle
Note : Adjust the bracket angle to -2
Note
Change Angle
Fix the product to the wall bracket.
1
Hold the product at the top in the center and
2
pull it forward (direction of the arrow) to
adjust the angle. (See the figure to the right)
You can adjust the bracket angle between -2°
3
and 15°.
Notes
• Contact an authorized technician when installing the wall attachment panel.
• After hanging the TV panel on the wall attachment panel, make sure that the Insulation holders are
completely secured.
• Be careful not to get your fingers caught during installation.
• Make sure the wall attachment panel brackets are tightened. Otherwise, the TV panel may
fall down.
• Please secure the mounting bracket on the wall surface after setting its angle at 0°.
11-10
o
before installing it on the wall.
How to Adjust Mounting Angle
Make sure to use the top center, and not the
left or the right side of the product to adjust
the angle.
Samsung Electronics