Samsung HP-R5052 Service Manual page 74

Operation Instruction & Installation
11-1-2 Rear Panel
1 POWER IN
Connect the supplied power cord.
2 SERVICE ONLY
Connector for service only.
3 HDMI/DVI IN
Connect to the HDMI jack of a device with
HDMI output. These inputs can also be used
as a DVI connection with separate analog
audio inputs. An optional HDMI/DVI cable
will be necessary to make this connection.
When using the optional HDMI/DVI adapter,
the DVI analog audio inputs on your TV allow
you to receive left and right audio from your
DVI device. (Not compatible with PC)
4 DVI AUDIO IN (L-AUDIO-R)
Connect to the DVI audio output jack of an
external device.
5 PC IN
Connect to the video output jack on your PC.
6 PC AUDIO IN
Connect to the audio output jack on your PC.
7 OPTICAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
8 COAXIAL DIGITAL AUDIO OUT
Connect to a Digital Audio component.
Note
• Please be sure to match the color coded input terminals and cable jacks.
11-2
9 Anynet
Please refer to the Anynet Owner's
Instruction. This jack is for connecting to
other Samsung Anynet-enabled devices.
10 COMPONENT IN 1, 2
Video (Y/P /P ) and audio (L-AUDIO-R)
R
B
component inputs.
11 CableCARD TM
Insert the CableCARD into the slot.
12 ANT (75Ω )
75 Ω Coaxial connector for Antenna/Cable
Network.
13 AV IN(L-AUDIO-R)
Audio inputs for external devices, such as
a camcorder or VCR.
14 VIDEO
Video input for external devices, such as
a camcorder or VCR.
15 S-VIDEO
Video input for external devices with an
S-Video output, such as a camcorder or VCR.
16 AUDIO OUT
Audio outputs for external devices.
Samsung Electronics