ashtech MobileMapper 100 Getting Started Manual page 5

www.fcc.gov/oet/ea/fccid after searching on FCC ID:
NZI802111A.
This device is compliant with SAR for general popu-
lation /uncontrolled exposure limits in ANSI/IEEE
C95.1-1999 and had been tested in accordance with
the measurement methods and procedures specified
in OET Bulletin 65 Supplement C.
For body worn operation, this device has been tested
and meets the FCC RF exposure guidelines for use
with an accessory that contains no metal and the po-
sitions the handset a minimum of 0.5 cm from the
body. Use of other accessories may not ensure com-
pliance with FCC RF exposure guidelines. If you do
not use a body-worn accessory and are not holding
the device at the ear, position the handset a mini-
mum of 0.5 cm from your body when the device is
switched on.
IC
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with Canadi-
an ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
This Category II radio communication device com-
plies with Industry Canada Standard RSS-310.
Ce dispositif de radiocommunication de catégorie II
respecte la norme CNR-310 d'Industrie Canada.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliant with SAR for general popula-
tion/uncontrolled exposure limits in IC RSS-102 and
had been tested in accordance with the measure-
ment methods and procedures specified in IEEE
1528. This equipment should be installed and oper-
ated with minimum distance 0.5 cm between the ra-
diator & your body.
This device and its antenna(s) must not be co-locat-
ed or operating in conjunction with any other antenna
or transmitter.
The County Code Selection feature is disabled for
products marketed in the US/Canada.