ashtech MobileMapper 100 Getting Started Manual page 10

2
– Remove the protective cover [1] by pushing the button
then sliding the cover forward.
[1]
– Choose the plug that fits your country's AC outlet
standard (see [2]) and slide it into the AC adapter [3}.
(A "click" must be heard when fully inserted.)
– Connect the AC adapter to an electric outlet.
• Put the docking station [4] on a horizontal plane.
[6]
[4]
• Connect the output cable [5] of the AC adapter to the back
of the docking station.
• Insert the receiver [6] vertically, into the docking station.
The light indicator [7] turns steady red, meaning the
receiver is properly connected to the station and battery
charging is in progress.
The light indicator [7] will turn green when the battery is
fully charged.
[2]
[5]
[3]
[7]