When Using Propane - Sanyo SGP-E70J2GU2 User Manual

Outdoor Unit

(5) When using Propane

● When using Propane as the gas fuel (Applicable model type:
SGP-E××× J2GU) it is necessary to adjust the fuel adjustment
valve and the gas type setting.
1 Fuel valve setting
• With the power supply breaker for the outdoor unit OFF
Remove the cover of the fuel distribution box.
Remove the 4×20 screws as shown in the diagram (4 locations)
and remove the bypass lid.
Reverse the bypass lid (concave part facing out) and fix it with the
removed screws.
Note: After fixing the lid, check that there is no gas leak. Fires can
be caused by leaking fuel gas etc.
Close the lid of the fuel distribution box.
Attach the "gas type setting/adjustment completed" label in the prescribed PL NAME position in the electrical control box.
2
Fuel Gas Type Setting
• Check that the fuel adjustment valve setting has been set before operating the outdoor control board.
Press the home key (S004) for longer than one second and the menu item number will be displayed.
Next, press the up (S007)/down (S006) key to set the menu item number to
After displaying
green LED (D053) lights up, and the system address setting is displayed.
(For example:
Next operate the down (S006)/up (S007) key, to display the gas type setting. When the gas type setting is displayed, press the set
(S005) key for longer than one second.
*When setting the gas type,
(for ** enter 00-09•A0A-0F
A red LED (D052) lights up, indicating that a forced setting is being carried out. In this condition, press the down (S006)/up
(S007) key, and select the gas type.
*
The relationship between display and gas type is as shown in the following table.
Up key
(S007)
Down key
(S006)
After completing selection of gas type, press the set (S005) key for longer than 1 second. The red LED (D052) will be
extinguished.
Press the home (S004) key to complete the setting.
*When using propane, change the setting in accordance with the above procedure to
, is displayed. When
)
** is displayed.
Display Gas type
(GAS 00) Propane
(GAS 01) No use
(GAS 02) Natural gas G20
(GAS 03) Natural gas G25
4 x 20 screws
G31
B - 3
1. Conditions for gas use
Bypass lod
when using LNG
when using LPG
.
is displayed press the set (S005) key. The
.