Programming Your Remote - JVC LCT2518-002C-A User Manual

Programming Your Remote

You can program your remote control to operate your external devices, using the instructions
and codes on pages 51 - 57.
How to set the codes
1) Manually turn on the device.
2) Change the remote control mode according to the device by pressing the MODE button.
Refer to the following list for which mode to use.
Device
TV
STB
VCR
DVD
AUDIO
3) Find the remote control code for your device. See pages 53 - 57.
4) Set the remote code.
TUNE
Press and hold
5) Point the remote at the device and press power. If your device did not turn off or respond, try
another code.
Notes:
• If your device doesn't respond to any of the codes listed or is not listed, see page 52.
• Some codes may have only limited functions. Try other codes that may have more functions.
Applied for these devices
JVC brand only
Cable Set Top Boxes, Cable/PVR Combinations, Satellite Set Top Box
DBS/PVR Combination
VCR, DBS/PVR Combination, PVR, DVD/PVR Combination
DVD Player, DVD Recorder, Home Theater in a Box, Receiver
Amplifier, Home Theater in a Box, Receiver
1 2 3
4 5 6
7 8 9
RETURN +
0
TV
TUNE
Enter the four digit number
The mode indicator goes
out for a second, then it
lights.
51