JVC LCT2518-002C-A User Manual page 63

Connect a Computer
Notes:
• Make sure your TV is displaying INPUT 1, INPUT 2, INPUT 3 or INPUT 5 by pressing the V1,
V2, V3 or V5 button on your remote control.
• To use PC Smart Input function, see page 43.
• When you connect a PC using HDMI-DVI cable, connect an audio cable to INPUT 1 DVI
ANALOG AUDIO on the TV.
• Use a D-SUB cable with ferrite cores and no longer than 3 meters to avoid electromagnetic
disturbances.
• Refer to your computer's manual for more information.
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
D-SUB
Notes:
• Depending on signal quality, some pictures may not be displayed correctly.
• Computers that cannot set the refresh rate to 60 Hz, cannot be used with this TV.
• If you are inputting a PC signal that is invalid, "No signal or Signal can not be displayed" will
appear on the TV screen. It appears when the input is PC and it is a single screen.
• When you connect a PC using an HDMI cable, the TV image may not be displayed correctly.
PC
Or...
PC
V. Frequency H. Frequency
(Hz) (kHz)
60 31.5
60 37.9
60 48.4
TV Rear Panel
TV Rear Panel (INPUT 1)
INPUT 1 INPUT 2 INPUT 2 INPUT 3 INPUT 3
75 Ω 75 Ω
(VHF/UHF) (VHF/UHF)
Format Resolution V. Frequency
(Hz)
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
FHD 1920 x 1080
HDMI
H. Frequency
(kHz)
60 31.5
60 37.9
60 48.4
60 67.4
63