Trip Meter; Hazard Warning Flasher; Power Outlet (If Equipped) - Hyundai Getz Quick Reference Manual

TRIPMETER
The tripmeter indicates the distance of
individual trips selected. Tripmeter can be
selected by pressing the trip mode/reset
switch for less than 1 second and then
releasing.
Tripmeter can be reset to 0.0 by pressing
the trip mode/reset switch for more than 1
second.

POWER OUTLET (IF EQUIPPED)

When the ignition switch is in the ACC or ON
position, the power outlet can be used. The
power outlet is designed to provide power
for mobile telephones or other devices
designed to operate with vehicle electrical
systems. The devices should draw less than
10 amps with the engine running.
7
Getz.indd 7

HAZARD WARNING FLASHER

The hazard warning flasher should be used
whenever you find it necessary to stop the
vehicle in a hazardous location.
The hazard warning lights are turned on by
pushing in the hazard switch. This causes
all turn signal lights to blink. The hazard
warning lights will operate even though the
key is not in the ignition switch.
To turn OFF the hazard warning lights, push
the hazard switch.
4/10/08 8:21:54 PM