Table of Contents
Advertisement
HD-SDI Camera·User Manual
D-Zoom and Smart D-Zoom cannot take effect simultaneously.
2 areas are selectable. Move the joystick up/down to select the area.
Set the display ON/OFF to display/not display the smart D-Zoom area. And if the
display is set to ON, press OK to enter the position edit interface and define the
smart D-Zoom area.
The sensitivity ranges from 0 to 60. The higher the sensitivity, the easier the
smart D-ZOOM is triggered.
The min. magnification is x 2.0, and the max. magnification is x62.0.
The time refers to the duration of the magnification, you can set it from 0 to 15.
Move the cursor to DEFAULT and press OK to restore the smart D-Zoom settings
to the default.
NEG.IMAGE
You can set the NEG IMAGE as ON or OFF, and if you set it as on, the bright area
and the dark area of the image are reversed.
3.8.3 Motion
In the user-defined motion detection surveillance area, the moving object can be
detected and the alarm will be triggered.
45
Advertisement
Table of Contents
