Table of Contents
Advertisement
Steps:
1. Move the cursor to START, and press OK to confirm.
2. Press OK to start black DPC correction.
The DPC detection and correction levels are adjustable [0-255], and the DIFF.TH
refers to the threshold value the device judges a pixel to a black pixel.
3.8.7 Version
Move the cursor to version and press OK to check the software version of the
device.
3.9 ADJUST
In the Adjust sub-menu, you can configure the settings, including the sharpness,
the image quality on monitor, the OSD settings, the Lens Shadow Compensation,
and the Video output standard, etc. Move the cursor to ADJUST and press OK to
enter the adjust configuration interface.
HD-SDI Camera·User Manual
BLACK DPC
1.START
2.LEVEL
-----|------85
3.DIFF.TH
---|--------29
4.RETUEN
RET
Figure 3-21 Black DPC
51
Advertisement
Table of Contents
