Advertisement
4
A
10 mm
1
2
SERIAL NUMBER LOCATIONS
Chassis number
The chassis number is stamped on the right side of the steering head tube. Write
this number into the field on page no 1.
Engine number, engine type (125/200)
The engine number and the engine type are stamped into the left side of the
engine below the engine sprocket. Please note this number down on page 1.
Engine number, engine type (250/300/380)
Engine number and engine type are stamped on the right hand side of the engine
in front of the kickstarter. Write this number into the relevant area on page 1.
OPERATION INSTRUMENTS
Clutch lever (125/200)
1
The clutch lever
is located on the left side of the handlebar. The adjusting screw
A
is used to change the original position of the clutch lever (see maintenance
work on chassis and angine).
Clutch lever (250/300/380)
2
The clutch lever
is fitted on the left hand side of the handle bar. When engine is
cold, there should allways be a play of 10 mm (0.4 in) at this lever (measured at
outer edge).
!
I
F THERE IS NO PLAY ON THE CLUTCH LEVER
,
WILL THEN OVERHEAT
DESTROYING THE CLUTCH LININGS
CAUTION
,
THE CLUTCH WILL START TO SLIP
.
!
. T
HE CLUTCH
Hide quick links:
Advertisement
