Serial Number Locations; Chassis Number; Engine Number, Engine Type; Operation Instruments - KTM 950 ADVENTURE 2004 Owner's Manual

1
A
2
3
B

SERIAL NUMBER LOCATIONS

Chassis number

The chassis number is located on the right side of the steering head tube
and on the type label. Write this number into the relevant area on page 1.

Engine number, engine type

The engine number and engine type are embossed in the engine case near
the shift lever. Write this number into the relevant area on page 1.

OPERATION INSTRUMENTS

Clutch lever

1
The clutch lever is located on the left side of the handlebar. The adjusting
A
screw is used to change the original position of the clutch lever (see
maintenance work on chassis and engine).
The clutch is hydraulically actuated and adjusts itself automatically.

Choke lever

2
If the choke lever is pulled backwards, a bore in the carburetors will be
opened in the carburetor through which the engine may draw in additional
fuel. This produces a „rich" fuel/air mixture necessary for cold start. The
fuel quantity and thus the engine speed are determined by the choke lever
position.
At temperatures over 5°C (41°F) it will suffice to pull the choke lever half
way out. At temperatures below 5°C (41°F) the choke lever should be pul-
led all the way out. The hole is closed again by pushing the choke lever all
the way back in.

Hand brake lever

3
The hand brake lever is mounted on the handlebars on the right and
actuates the front wheel brake. The adjusting screw
change the basic position of the hand brake lever (see "Maintenance").
5
B
can be used to