Table of Contents
Advertisement
Quick Links
Rapido Fix Car Seat
Groups 2+3 child car seat
This product conforms to ECE R44.04
Group 2+3 child car seat.
Suitable for children from 15kg to 36kg (approx 4 to 12 years old)
Instructions: Please read carefully and keep for future reference.
Your child's safety may be affected if you do not follow these
instructions.
V3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for My Child Rapido Fix Car Seat
Summary of Contents for My Child Rapido Fix Car Seat
- Page 1 Rapido Fix Car Seat Groups 2+3 child car seat This product conforms to ECE R44.04 Group 2+3 child car seat. Suitable for children from 15kg to 36kg (approx 4 to 12 years old) Instructions: Please read carefully and keep for future reference.
- Page 2 Notices 1. The child car seat must only be used in vehicles which are fitted with a three point seat belt system that has been approved by regulation ECE-16 or similar. 2. A correct fit is likely if the vehicle manufacturer has declared in the vehicle hand book that the vehicle is capable of accepting a ‘Universal ’child restraint for this group.
- Page 3 EXTREME HAZARD NEVER USE IN FRONT PASSENGER SEATS EQUIPPED WITH AIRBAGS (SRS) THIS CAN INCLUDE REAR PASSENGER SEATS THAT ARE EQUIPPED WITH AIRBAGS* *Consult car manufacturer for suitability. Children’s bodies are not able to withstand the forces exerted on them by a deploying air-bag When Using the Child Car Seat Warning: Make sure that the child car seat is placed somewhere so that rigid items and plastic parts do not become trapped in doors or movable seat units when the seat is in...
-
Page 4: Table Of Contents
Whilst we make and test our products to the highest standards of durability there’s always a small chance of a hiccup! Our promise is to repair, replace or refund a MyChild product that has an identified manufacturing defect from the date of purchase for a full 3 years thereafter at no extra cost. -
Page 5: Welcome
Thank you for purchasing the Rapido Fix child car seat. Please read these instructions carefully before use to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility. If you have a query with this product or require replacement parts, please contact your nearest MyChild retailer. Parts checklist Backrest... -
Page 6: Positioning The Seat
Positioning the seat The child car seat can only be used with an automatic 3-point safety belt (A) and NOT with a 2-point lap belt (B). The child car seat can be secured in a forward-facing position in the rear seats of the vehicle by using the existing seat belts. -
Page 7: Installing The Child Seat - Using Isofix System
Installing the child seat - using ISOFIX system For vehicles equipped with ISOFIX points, then we advise they are used. If you are not sure if you have ISOFIX points, feel between the joint of the passenger seat back and passenger seat base (A) and feel for 2 metal brackets similar to (B). - Page 8 Installing the child seat - using ISOFIX system (continued) click Place the child in the child car seat. Lock the vehicle seat belt into the buckle ensuring it clicks into place. Note: Make sure the seat belt is not twisted. Note: The lap belt should be worn low over the hips.
-
Page 9: Installing The Child Seat - Using Isofix System
Installing the child seat - using ISOFIX system (continued) Adjust the child car seat to the correct height by pushing the backrest adjusting button and moving the backrest up or down to the desired height. When adjusting the backrest, ensure the correct height is found. (G) The backrest is the correct height. -
Page 10: Installing The Child Seat - Using Seat Belt
Installing the child seat - using seat belt Ensure the ISOFIX connectors are folded away (if they are not then reverse the steps under “Preparing the ISOFIX stability connectors“) Place the child car seat on a suitable passenger seat. Push the child car seat firmly back into the passenger seat. - Page 11 Installing the child seat - using seat belt (continued) Make sure the lap belt passes under the armrests through the lap belt guides and that the shoulder belt passes diagonally through the shoulder belt guide and over the armrest nearest to the seat belt buckle. Adjust the child car seat to the correct height by pushing the backrest adjusting button and moving the backrest up or...
-
Page 12: Reclining Position
Installing the child seat - using seat belt (continued) Ensure the vehicle seat belt is positioned in the arc between (F) and (G), failure to do so may result in the seat belt laying incorrectly across your child and reducing the safety of the seat. ATTENTION: The child car seat should always be either strapped in using the vehicle’s seat belt or locked in place... -
Page 13: Removing The Car Seat
Reclining position (continued) (C) Normal, seated position. (D) Reclined, reclining position. Removing the child car seat Remove the vehicle seat belt from the belt guides. If your vehicle does not have an ISOFIX system then you can now remove the child car seat, otherwise follow the step below. -
Page 14: Removing And Replacing The Cover
Removing and replacing the cover WARNING: The cover is a safety feature. Never use the child car seat without it. Remove the seat base cover by unfastening the two press studs (A) along the back edge of the base and cover pulling the cover forward and off. -
Page 15: Maintenance And Cleaning
4) Dry flat, away from direct heat and sunlight. 5) If the seat covers need to be replaced only use MyChild certified parts. They are the only ones that are guaranteed to have been safety tested and designed to fit this seat. - Page 16 Customerservice@kooltrade.co.uk Imported by MyChild. M34 3QA www.mychildonline.co.uk Tel: 0161 335 2508...
Need help?
Do you have a question about the Rapido Fix Car Seat and is the answer not in the manual?
Questions and answers