Casio MZ-2000 Service Manual page 3

Punch-in Functions:
Editing Functions:
Pattern Sequencer
User Pattern Areas:
Memory Capacity:
Elements:
Number of Parts:
Recording Methods:
Editing Functions:
Song Studio
Number of Songs:
Composing Functions:
Editing Functions:
Memory Capacity:
Registration Memory
Number of Memory Areas:
Savable Setup Data:
Demos:
Synthesizer:
Parameters:
Mixer:
Number of Channels:
Parameters:
MIDI:
Controllers:
Other Functions
Transpose:
Tuning:
Terminals
MIDI:
TO HOST:
Foot Pedal:
Expression Pedal:
Line Out (L/R):
Line In (L/R):
Headphones:
Microphone In:
Power:
Manual punch-in; auto punch-in
Song editing; track editing; event editing
10
Approximately 22,000 notes
Intro 1, 2; Fill In BACK, NORMAL, NEXT; Variations 1 through 4; Endings
1, 2
8 (drum, percussion, bass, chord 1 to 5)
Real-time, step
Element editing; part editing; event editing
10
Chord extraction, pattern extraction, melody extraction from SMF or Song
Sequencer data
Chord editing; melody track editing
Memory shared with Song Sequencer
64 (8 sets × 8 banks)
Rhythm; tone; tempo; auto harmonize, arpeggiator, sustain button on/off
status; accomp volume; transpose setting; effect settings, etc. (See the
"Registration Memory/One Touch Preset Table" for more information.)
Melody Demos (3 tunes); Tone Demos (10 tunes); Rhythm Demos (10
tunes); Function Demo (1 tune)
Two modes (basic settings, advanced settings)
Basic tones (DCO) × 4; envelope (accomp envelope, filter envelope, pitch
envelope): LFO × 2 channels; effect settings; controller settings
Two modes (basic settings, advanced settings)
31 (15 internal + 16 external)
Tone; part on/off; input (microphone, line only); pan; volume; reverb depth;
chorus depth; DSP; noise gate threshold; EQ high frequency/high gain;
EQ low frequency/low gain; coarse tune; fine tune
16-channel multi-timbre receive; GM Level 1 compliant
Pitch bend wheel; modulation wheel; assignable button; sustain button
49 levels (–24 semitones to 0 to + 24 semitones)
A4=415.3Hz to 466.2Hz (Center: 440Hz)
IN, OUT, THRU
Mini DIN jack (selectable)
Standard jack
Stereo standard jack
Standard jack × 2
Output impedance: 5.7kΩ
Output voltage: 3.0V (RMX) MAX
Standard jack (with bypass switch) × 2
Input impedance: 75kΩ
Input sensitivity: 200mV
Stereo standard jack
Standard jack (with microphone volume knob)
Input impedance: 40kΩ
Input sensitivity: 10mV
16V DC
— 2 —