Parts Replacement; Required Tools And Equipment; Front Cover Assembly; Removal - Polaroid M402b Repair Manual

M402b MiniPortrait Camera Repair Manual
This section of the Repair Manual describes the camera's disassembly procedures.
Care should be taken throughout all disassembly and reassembly procedures
never to smudge or soil the lenses.

Required Tools and Equipment

• Lens cleaning tissue
• Dust and static free wiping cloth
• Cotton gloves or finger cots
• Standard tool kit
• Solder sucker
• Tweezers
• Hot glue gun and glue

Front Cover Assembly

Removal

1. Remove the four (4) lens caps from the front cover lenses.
2. Pull out the aperture knob from the aperture drive gear.
3. Using a pair of tweezers, peel off the upper decal cover and lower decal cover.
4. Using a Phillips head screw driver, remove the six (6) screws that secure the front cover
and the shutter plate assembly to the camera body.
When installing the front cover make sure:
• the four (4) fine thread screws are used to secure the top of the front
cover and the shutter plate assembly to the camera body.
• the two (2) coarse thread screws are used to secure the bottom of the
front cover and the shutter plate assembly to the camera body.
2. Disassembly/Assembly
CAUTION
(Figure 2-1)
CAUTION
9
Disassembly/Assembly