17.2.1 Communication Format
Commands consist of an address and the same command as for the RS-232C.
Commands return the same command when there is no transmitting data.
If address is 23, the repl y is as follows:
Normal response
Response of impossible command
Undefined command response
Bit format
17.2.2 Command List
The following explanation uses "format 1 ( f15 0 )" and assumes address is 23
Data output
The current weighing data is output.
Template
Command
Reply
Selection of mode and unit
Selects the mode and unit. This is same as the
Template
Command
Reply
Q
U
The scale changes mode and unit
HV-G Instruction Manual Page 59
switch.
MODE