Advertisement
Installing the Custom-Shape Wireless Dog Fence
Removing/Resetting System Bases:
Should you need to move a Base(s) to provide a more accurate Fence Boundary, or
because you move, relocate or because of interference from objects inside
or outside the home (such as bushes, trees or other large objects), follow
these steps:
®
1.
Make sure the Havahart
Wireless Collar is not on your dog.
2.
Select "System" from the main menu
3.
Select "Yes" (see Screen 2.1).
4.
Select "Yes" again (see Screen 2.2).
5.
Unplug ALL Bases and reposition the Base(s) as needed.
6.
Plug in the Master Base A.
7.
Press "Complete".
8.
Walk clockwise to the right of the Master Base A.
Plug in Base B and Press "Complete".
9.
Repeat this process for the 2 remaining Bases.
Advanced Base Setup – Manual Distance Entry:
®
1.
Make sure the Havahart
Wireless Collar is not
on your dog.
2.
Select "System" from the main menu.
3.
Select "Yes" (see Screen 2.1).
4.
Select "ADVANCED" (see Screen 2.2).
5.
Measure the 6 distances (in feet) between the Bases (see Illustration F)
write them in the chart below. Each pace is about 3 feet.
_____ feet
_____ feet
A to B
C to D
A to C
_____ feet
_____ feet
B to C
D to A
B to D
6
Press "Complete" (see Screen 2.3).
7.
Press each value to enter each distance (see Screen 2.4). You will need to
press "NEXT" twice between screens and "Done" when complete.
8.
Press "Continue" (see Screen 2.7) and a Congratulatory screen will appear.
9.
Press "Yes" to install your Fence Boundary again.
®
Havahart
Custom-Shape Wireless Dog Fence
15
www.HavahartWireless.com
IMPORTANT MESSAGE
IMPORTANT MESSAGE
Advanced Base Setup should be used
ONLY when you have severe issues
®
where the Havahart
Wireless Collar
corrects inconsistently and Moving and
Resetting the Bases does not resolve the
issue. The system automatically calculates
the distances between the Bases during
setup. In rare cases, it is possible that the
system may need to have the distances
manually entered.
Screen 2.1
Screen 2.2
Screen 2.3
Screen 2.4
!
_____ feet
_____ feet
Screen 2.7
Master Base A
Base D
Illustration F
!
3
Setting Up the Exclusion Zones
(optional)
What are Exclusion Zones (ExZones)?
Exclusion Zones are target areas on your property where you wish to
restrict your dog's access, such as a flower bed, children's play area,
pool or patio. Exclusion Zones are optional and may be added either
during or after the initial installation process. Up to 4 Exclusion Zones
can be created. The minimum size of an Exclusion Zone is 12' x 12'.
Fence Boundary
Each Exclusion Zone cannot be located within 20 feet of another
Exclusion Zone, Fence Boundary or Base.
The following are examples of possible Exclusion Zones:
Good
Exclusion
Base
Master Base
Zone 1
2
Exclusion
Deck
Pool
Zone 2
Minimum Size
12' x 12'
Dog should be able to walk between Exclusion Zone
1
and boundary
Base
Base
2
Dog should be able to walk between Exclusion Zones.
Exclusion
Zone 2
Swing Set
Fence Boundary
Using the Controller, you have the ability to:
• Add/Remove an Exclusion Zone
• Name an Exclusion Zone
• Turn an Exclusion Zone On or Off
Base B
Base C
IMPORTANT MESSAGE
If you choose to add an Exclusion Zone
after the initial installation process,
you will need to retrain your dog to
familiarize him with the new restricted
area.
Fence Boundary
Flower
Garden
Bad
Base
Master Base
1
Distance of 20
Exclusion
feet or greater
Zone 1
Distance is less
Shed
Shed
than 20 feet
2
Deck
Pool
Exclusion
Zone 2
Dog may not be able to walk between Exclusion Zone
1
and boundary. It would be better to make the boundary
Base
Base
include the Exclusion Zone.
Exclusion
Dog may not be able to walk between Exclusion Zones.
2
Zone 2
It would be better to make one big Exclusion Zone.
Swing Set
Fence Boundary
®
Havahart
Custom-Shape Wireless Dog Fence
!
Flower
Garden
1
Shed
Shed
16
1-800-800-1819, Option 1
Advertisement
