Advertisement
Training Your Dog
PHASE 5 --
Dog Monitoring -- DAY 16 AND BEYOND
Start with short sessions and gradually increase duration
1.
Your dog should now be comfortable within the Roaming Area and reluctant to cross the Trigger Zone
with or without distractions.
®
2.
Fit the Havahart
Wireless Collar around your dog's neck. Place a different non-metal Collar above the
®
Havahart
Wireless Collar.
3.
Allow your dog to roam freely off leash within the Roaming Area.
4.
Keep an eye on him from inside your house.
5.
End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from the Training Flags.
®
6.
Be sure to remove the Havahart
Wireless Collar from your dog after each training session.
NOTE: After completing the training and three additional weeks of successful dog
containment, you can begin to gradually remove the Training Flags by taking away every
other flag, every few days.
CONGRATULATIONS TO YOU AND YOUR DOG FOR SUCCESSFULLY COMPLETING
ALL PHASES OF TRAINING!
®
Havahart
Custom-Shape Wireless Dog Fence
35
www.HavahartWireless.com
Terms of Use and Limitation of Liability
1. Terms of Use
This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this
Product implies and acknowledges on your behalf acceptance of all such terms, conditions, and notices.
2. Proper Use
This Product is designed for use with dogs as a training aid. Because of the specific personality, temperament, size and age of your dog, this Product may
not be appropriate for your dog. Use of this Product is not recommended if your dog is less than six (6) months old, weighs less than eight (8) pounds or
if your dog has ever exhibited signs or symptoms of aggressive behavior. You should consult a veterinarian or certified trainer if you have any concerns
or questions regarding the suitability of this Product for use on your dog. Proper use of this Product includes, but is not limited to, reviewing the entire
Instruction Manual provided with your Product including: warnings, caution statements, important notes and notes.
3. No Unlawful or Prohibited Use
This Product is designed for use with dogs only. This dog training device is not intended to harm, injure or provoke. Using this Product in a way that is not
intended could result in violation of Federal, State or Local Laws.
4. Limitation of Liability
In no event shall Woodstream Corporation be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages
whatsoever arising out of or connected with the use or misuse of this Product. The original purchaser assumes all risks and liability from the use of this
Product and agrees, by usage of this Product, to hold harmless and indemnify Woodstream Corporation, their officers, agents, and employees, from any and
all liability, loss, damages, costs or expenses which are sustained, incurred, or required arising out of your actions while using this Product.
5. Modification of Terms and Conditions
Woodstream Corporation reserves the right to change, alter, amend, and/or revoke the terms, conditions and notices under which this Product is offered.
FCC
WARNING: Changes or modifications to this device not expressly approved by Woodstream Corporation could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
WIRELESS COLLAR: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
Industry Canada:
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement. L'opération
est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle
interférence reçue, y compris l'interférence qui peut causer l'opération peu désirée.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
This device has been designed to operate with the antennas listed below, and having a maximum gain of 5 dB. Antennas not included in this list or having a
gain greater than 5 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
Acceptable antennas are:
Nearson Collinear Antenna part number S151AH-2450
Skywave Antennas Part number 11-1080B
Caution
®
The Custom-Shape Havahart
Wireless Dog Fence is neither a physical barrier nor a substitute for traditional obedience training. The system is designed to
act as a deterrent to remind dogs by auditory and/ or static correction to remain in the Trigger Zone established. It is important that you reinforce training
with your dog on a regular basis. Since the tolerance level to static correction varies from dog to dog, Woodstream Corporation CANNOT and DOES NOT
guarantee or warrant that the system will, in all cases, keep a dog within the established Trigger Zone. Not all dogs can be trained to avoid crossing the
Trigger Zone! Therefore, if you have reason to believe that your dog may pose a danger to others or harm himself if he is not kept from crossing the Trigger
®
Zone, you should NOT rely solely upon the Custom-Shape Havahart
Wireless Dog Fence to confine your dog. Woodstream Corporation shall NOT be liable
for any property damage, economic loss or any consequential damages sustained as a result of any animal crossing the Trigger Zone.
®
Havahart
Custom-Shape Wireless Dog Fence
36
1-800-800-1819, Option 1
Advertisement
