Picture Setting - JVC GM-H40L1G Instructions Manual

PICTURE SETTING

Item
PICTURE MODE
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
BACK LIGHT
COLOR TEMP.
sub menu
CTI/LTI
reset
NOTE
• You can adjust the items in "PICTURE SETTING" for each picture mode. Select a picture mode you want to adjust fi rst. (The setting values are
stored.)
• "PHASE" does not appear on the menu for the following input signals:
– RGB, PAL, SECAM, BW (50 Hz/60 Hz)
• You can make the detailed settings of the color temperature using the set-up menu (see "COLOR TEMP." on page 25).
SIZE SETTING
Item
H SIZE
H POSITION
V SIZE
V POSITION
DOT CLOCK
CLOCK PHASE
ASPECT
sub menu
reset
NOTE
• During the size and position adjustments, the picture may be distorted but this is not a malfunction.
• Size and position adjustments are related so that if one is set to a higher setting value, the other's setting value will be reduced.
To do
Selects a picture mode you want (see "Selecting the picture mode"
on page 16).
Adjusts contrast of the picture.
Adjusts the brightness of the picture.
Adjusts the color density of the picture (except for RGB and BW
(50 Hz/60 Hz) signals).
Adjusts the color phase.
Adjusts the outlines of the picture.
Adjusts the brightness of the display.
Selects the color temperature.
Displays the adjustment bar which enables you to adjust the items in "PICTURE SETTING"
(except for "CTI/LTI") while viewing the actual picture.
Adjusts the clearness of the picture.
Restores the default setting for all the items in "PICTURE SETTING. "
To do
Adjusts the horizontal screen size.
Adjusts the horizontal screen position.
Adjusts the vertical screen size.
Adjusts the vertical screen position.
Adjusts to eliminate stripes or fl ickering when analog signals
are being input from a computer. Use with "CLOCK PHASE. "
Normally, no adjustment is needed.
Adjusts to eliminate stripes or fl ickering when analog signals
are being input from a computer. Use with "DOT CLOCK. "
Normally, no adjustment is needed.
Selects the aspect ratio (see "Changing the aspect ratio" on
page 15).
Displays the adjustment bar which enables you to adjust H SIZE/POSITION, V SIZE/POSITION,
DOT CLOCK, and CLOCK PHASE while viewing the actual picture.
Restores the default setting for all the items in "SIZE SETTING. "
Setting value
DYNAMIC, NORMAL, USER
–20 += 00 += +20
–20 += 00 += +20
–20 += 00 += +20
–20 += 00 += +20
–20 += 00 += +20
–20 += 00 += +20
HIGH, MID, LOW, USER
OFF, 1, 2
Setting value
Varies depending on other
settings.
–10 += 00 += +10
–32 += 00 += +32
REGULAR, FULL, ZOOM,
PANORAMIC, REAL DOT
19