JVC GM-H40L1G Instructions Manual page 7

1
(Power) button: Turns the monitor on/off (see page 14).
2 INPUT button:
3 MENU button:
4 5/∞ buttons:
5 +/– buttons:
6 SET-UP button:
VIDEO IN A/B terminals
Connect video output terminals of equipment such as a VCR (see page 13).
VIDEO IN A terminal
IN terminal (BNC):
OUT terminal (BNC): Connect to the video input terminal of another monitor, etc.
Y/C IN terminal (Y/C): Connect to the S-video output terminal of playback equipment such as a
• When both IN terminal and Y/C IN terminal are used, the input to the Y/C IN terminal has priority.
VIDEO IN B terminal
RGB/COMPO. terminal (D-sub 15-pin)*: Connect to the video output terminal of a personal
DVI-D terminal (DVI-D)*:
* When connecting to a personal computer, use a cable with ferrite cores and no longer than of 3 m (118
electromagnetic disturbance.
Changes inputs (see page 14).
Displays the main menu (see page 17).
Selects an item on the menu (see page 17).
Adjusts the volume level (see page 14).
• When the menu is displayed, adjusts the value (see page 17).
Displays the set-up menu (see page 17).
AC IN terminal:
Connect the supplied power cord (see page 13).
POWER switch:
I : Turns on the main power. (The power can be
controlled by POWER ON/OFF buttons on the
remote control or
‡: Turns off the main power.
AUDIO IN A/B terminals
Connect audio output terminals of equipment
such as a VCR (see page 13).
AUDIO IN A terminal
AUDIO IN B terminal
Connect to the video output terminals of playback equipment such as a
VCR.
VCR.
computer or playback equipment such as a VCR.
Connect to the digital output terminal of a personal computer.
button on the main unit.)
R, L/MONO terminals (pin jack):
Connect to the audio output terminals of
the equipment connected to the VIDEO
IN A terminal. (Connect only the L/MONO
terminal for monaural sound.)
STEREO terminal (stereo mini jack):
Connect to the audio output terminals of
the equipment connected to the VIDEO IN
B terminal.
1 / ") to avoid
8
7