Parts Identifi Cation; Front Panel; Rear Panel - JVC GM-H40L1G Instructions Manual

Parts Identifi cation

Front panel

Rear panel

AUDIO OUT terminals
Connect external speakers or audio equipment.
EXT. SPEAKER terminal:
• To use this terminal, set "SPEAKER SELECT" on the main menu to "EXT. (external)" (see page 21).
MONITOR OUT terminals: Connect to the audio input terminals of audio equipment such as an amplifi er (see
6
Remote sensor:
Point the front end of the remote control toward here.
Eco sensor:
Detects brightness of the room (see page 23).
Self-diagnostic lamps:
Power lamp:
REMOTE terminals
Connect external control equipment (see pages 12, 31 to 33).
RS-232C terminal: Connect to the RS-232C terminal of a
RS-485 terminals:
IN terminal:
OUT terminal: Connect another component to send out the
Connect external speakers (commercially available) (see page 10).
page 12).
These lamps light/fl ash if something abnormal occurs with
the monitor (see page 36).
When the monitor is turned off : Unlit.
When the monitor is turned on: Lights in green.
When the monitor is in sleep mode: Flashes in orange.
When the monitor is in standby mode: Lights in orange.
Input card slots (SLOT-1, SLOT-2):
Optional input cards can be installed in these slots.
• For details about input cards, refer to the
instructions of the input card.
personal computer. For the control method
using this terminal, consult an authorized JVC
dealer.
Connect external control equipment.
control signal coming into the IN terminal
(cascade connection).