Function Setting - JVC GM-H40L1G Instructions Manual

FUNCTION SETTING

Item
COLOR SYSTEM
MULTI DISPLAY
MULTI SIZE
MULTI POSI.
reset
DUAL DISPLAY
MODE
MAIN WINDOW
SUB. WINDOW
SIZE
H.POSI./V.POSI.
SPLIT LINE
reset
STATUS DISPLAY
1080/1035
SUB HOUR METER
ECO SENSOR
reset
HOUR METER
NOTE
• The dual display mode is available only when "MULTI SIZE" is set to "OFF."
• "MULTI DISPLAY" is not displayed on the menu when the dual display mode is in use.
Available signals for the dual display mode
The dual display mode can be activated only when one of the following signals is being input to Input A and B.
• Input A: NTSC, PAL, SECAM, PAL-M, PAL-N, PAL60, NTSC4.43, BW (50 Hz/60 Hz)
• Input B (only analog RGB): VGA480-60, WVGA-60, XGA-60, WXGA-60
Example of the multiple monitor setting
Ex.: When "MULTI SIZE" is set to "2 * 2" and "MULTI POSI. " is set to "2. "
To do
Selects the color system. When you cannot view pictures correctly
with "AUTO, " select an appropriate option according to the current
input.
Sets the multiple monitor usage (see "Example of the multiple monitor setting" below).
Activates/deactivates the multiple monitor usage (2 monitors
horizontally * 2 monitors vertically).
Sets the position of this monitor when "MULTI SIZE" is set to
"2 * 2. "
Restores the default setting for "MULTI DISPLAY. "
Sets the dual display mode (see "Viewing Inputs A and B (analog RGB input) at the same
time—Dual Display" on page 16).
Selects the dual display mode.
Displays the input for the main window ("INPUT-A" or "INPUT-
B").
Displays the input for the sub window ("INPUT-A" or "INPUT-B").
Adjusts the size of the sub window (only for PIP mode).
Adjusts the horizontal and vertical position of the sub window
(only for PIP mode).
Adjusts the position of the border between the main window
and sub window (only for PBP mode).
Restores the default setting for "DUAL DISPLAY. "
Sets if you want the information of the current input to be
displayed on the screen (see "Displaying the current status" on
page 15).
Selects a High-Defi nition signal type (1080/60i or 1035/60i) for the
component signal to view the picture correctly.
Displays the hours of current use (unit: hour). You can reset only this item.
Sets the eco sensor which enables you to adjust the brightness of
the screen automatically according to the brightness of the room.
Restores the default setting for the items in "FUNCTION SETTING" except for "MULTI DISPLAY, "
"DUAL DISPLAY, " and "HOUR METER. "
Displays the total hours of use (unit: hour). This item is used for maintenance of the monitor.
This item cannot be reset.
Setting value
AUTO, NTSC, PAL, SECAM,
N4.43, PAL M, PAL N, PAL60
OFF, 2 * 2
1 += 4
OFF, PIP, PBP
SMALL-2, SMALL-1,
LARGE-1, LARGE-2
–20 += 00 += +20
RIGHT–2, RIGHT–1, CENTER,
LEFT–1, LEFT–2
OFF, ON
1080, 1035
ON, OFF
This monitor
1 2
3 4
—
—
23