Advertisement
3. Selecting the frequency, channel number
Press SET button so that the following information is displayed (main display)
With the " " or " " buttons you can directly switch between the factory-preset frequencies
(Channels presets). The display starts flashing by indicating that your selection is active. Press
SET button to record your setting.
4. Adjusting the squelch threshold (receivers only)
Select the "SQELCH" in menu by pressing the SET button until "SQELCH" appears on the
display; after a short pause the current squelch setting is displayed. With the "
or
you
"
" "
can select a different setting.
Advertisement
