Asus P505 Service Manual page 16

ASUSTeK COMPUTER INC.
Steps 7:1.Load CONNECTOR of BATT-NI-MH VARTA onto; tear
Notice: The end of a thread of CABLE is towards IR, put CABLE
Notice: Don't insert to CONNECTOR of RECEIVER.
2.Confirm whether BATT CONNECTOR is really
Steps 8:1.CURSORKEY and 6PINFPC combine
2.MAIN_BD CONNECTOR black gear of CONNECTOR of
3.Notice: Present about 90 degrees, in order to
4.Make 2 wings of 6PINFPC close to CONNECTOR.
Notice: Close to 2 wings of FPC CONNECTOR.
P505 SERVICE GUIDE
the sticks to the paper and sticks to PHONE
JACK right handling.
in order and wind from CONNECTOR of RECEIVER.
inserted.
6PINFPC turns on.
assemble.
Doc. No:
Date: DEC.02, 2004
Rev.: Page:
15